They also feature upgraded stainless steel fasteners. Anti-slosh foam is included inside the bladder to reduce sloshing and optimize the fuel collection of the lift pump. All fuel cells are manufactured in the USA. SELECTING THE FCST-FUEL CELL SURGE TANK.The fuel cells are delivered fully assembled with the selected FCST above. The FCST is available with or without fuel pumps. If "without pumps" is selected, some final assembly will be necessary by the installer. NOTE: Radium presumes the lift pump and surge tank pumps will be the same model so the internal wiring connectors for the surge tank primary pumps and lift pump will always be the same. If you will be using your own pumps or source pumps elsewhere, select the option "Surge Tank Pumps and Lift Pump Not Included" from the drop down. Note that there will be enough components included with this option to use 1, 2, or 3 surge tank pumps. Depending on the setup, some parts will simply not be used. Next, select the type of pumps that will be used so the appropriate internal wiring connectors will be included. If pumps are required, the FCST will come preassembled and inlet sock filters will be installed on all pumps. First, select the preferred number of surge tank pumps that will be used from the pull down menu. Next, select the type of pumps that will be used. Note that the surge tank's internal pump wiring harness is always configured to use up to 3 pumps even if only 1 surge tank pump is selected. The anodized green fittings signify the surge tank fuel pump outlets to the engine. These are available in -6AN male only. If only 1 surge tank pump is used, the "PUMP2" and "PUMP3" ports are plugged using the included anodized aluminum port plugs. If 2 surge tank pumps are used, the "PUMP3" port is plugged using the included anodized aluminum port plug. If 3 surge tank pumps are used, the included anodized aluminum port plugs will not be used. The "RETURN" black port fitting is used for low pressure fuel returning from the fuel pressure regulator. This port is tapped with 3/4-16 threads and a -6AN male fitting is included. For information regarding the FCST go HERE. There are 2 options for the filler flange, direct or remote fill necks.
For more information on these Radium Fill Necks. The fill neck 6-bolt 2.18 B. Pattern is an industry standard and other necks may be compatible. Radium includes a block-off plate covering the port for the level sender. All Radium Engineering Fuel Cells are non refundable.
If customer is supplying their own pump(s), the complete fuel cell and surge tank will arrive partially assembled. Final assembly will be required by the installer. SEE TERMS AND CONDITIONS FOR MORE. The item "RADIUM FUEL RACE SAFE CELL SET UP 22 GALLONS WITH SURGE TANK" is in sale since Tuesday, December 06, 2016. This item is in the category "Vehicle Parts & Accessories\Car, Truck Parts\Air Intake, Fuel Delivery\Fuel Pumps".The seller is "cjmotor" and is located in Brisbane. This item can be shipped worldwide.