1 Litre Swirl Pot/Tank to fit Walbro GS341 or GS342 Type Fuel Pump, Black
1 Litre Swirl Pot/Tank to fit Walbro GS341 or GS342 Type Fuel Pump, Black. This black swirl pot uses a Walbro GS341 or GS342 type pump to create a compact fuel system. It has the 3 ports so you can either run it the conventional way with lift pump in, tank return and rail return, or you can use a ticker pump at carb pressure and blank off the ports. This means that if you are converting an older car from carb(s) to fuel injection you don't need to change the fuel system too much. Just connect the current pump from the tank to this tank and then run from the Walbro pump through a filter to the injectors and then through a fuel pressure regulator and back to this tank.
We have made this tank compact so it can be installed under the bonnet if required further simplifing the conversion. In the picture you will see a spacer that fits to the pump to hold it off the bottom of the tank, there is then a seal that seals the pump into the tank and finally a top ring that goes over the top of the pump to stop it lifting out of the tank. The tank will hold 1 litre of fuel and is made from aluminium with a black finish. The 3 ports on the top are threaded with an M14 x 1.5 thread. The mounting tabs have the ribs shown.
Kage Trading Limited is one of the leading suppliers of performance exhausts and car parts. We've supported garages, aftermarket suppliers and end users for more than 15 years. We carefully source high quality race and aftermarket exhaust systems, manifolds and downpipes, to help you make the most of your vehicle.
Across our range you can find chassis, cooling and race components alongside, a full complement of Malian exhausts. Browse our full offer of Malian Exhausts, Barbarian Racing and Skadi Cooling parts, as well as EBC and MTech Brake packages.Our UK team is on hand to help with any queries and ensure you find just what you're looking for. All orders placed before 1pm will be dispatched same day (Mon-Fri, does not include bank holidays). Customers will be informed directly of any back orders or items with a longer lead time. Please note that for UK customers outside of the UK mainland (including Northern Ireland, Highlands and Islands, Channel Islands, there may be additional charges for courier items). The cost to safely and securely return any unwanted items lies solely with the purchaser.
This charge will reflect any damage or repair needed to the item and could be set at an amount up to and including the full original cost of the item. C the product has been manufactured to individual requirements and/or on a special order basis. 4.4: Some of the items available from Kage Trading Limited will require a signature upon receipt.
Prior to signing for goods we ask that you check that the goods are both undamaged and that all goods are in the consignment that should be. If you inform us of damages or shortfalls after signing for a consignment it makes it extremely difficult to make a claim from the couriers and some couriers will not accept liability. Claims for damages and shortfalls will be processed within 48 hours. The provisions of these clauses do not affect your statutory rights. If good quality images are available we may be able to use these to come to a conclusion.
We're here to help. Get in touch with our UK team.